Panasonic TH-58PZ850U Quick Start Manual

Also see for TH-46PZ850U: Technical guide Troubleshooting guide Operating instructions Service manual Operating instructions

31AdvancedHow to Use Menu Functions(picture, sound quality, etc.)Adjustments/Configurations (alternatives)[Photo viewer] To view the still picture. (p. 20)[Movie player] To view moving pictures recorded in MPEG 2 or AVCHD format. (p. 18) SD cardDisplays subtitles (Closed Caption) (p. 44) CCSets the mode to select the channel with Channel up/down button (All/Favorite/Digital only/Analog only)• Favorite: Only channels registered as FAVORITE (p. 17) Surf mode AllSelects the screen menu language (p. 14) LanguageAdjusts the clock (p. 14) ClockSets channels (p. 42) Program channelSelects the terminal and label of the external equipment (p. 45)[Component 1/Component 2/HDMI 1/HDMI 2/HDMI 3/HDMI 4/Video 1/Video 2]To prevent howling and image oscillation, stops output of the pictures and audio specified in this menu. (p. 45) (On/Off)Prevents “Image retention” with Wobbling. (Automatic/Force)• Automatic: Shifts the display image automatically.• Force: Shifts the display image every (1/2/3/4) minutes according to what was set in the “Time” menu.Pixel orbiter AutomaticSets the time for “Pixel orbiter-Force” setting. (1/2/3/4) Time 4Change the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only)• The recommended setting is “Bright” to prevent panel “Image retention”. (p. 58) Side bar BrightPress “OK” to start “Scrolling” on the screen (p. 58) Scrolling barControls equipment connected to HDMI terminals (p. 32) (On/Off)• “Power off link”, “Power on link”, and “Default speakers” cannot be selected if “Off” is set. VIERA Link OnSets “Power off link” of HDMI connection equipment (p. 32) (Set/No) Power off link SetSets “Power on link” of HDMI connection equipment (p. 32) (Set/No) Power on link SetSelects the default speakers (p. 32) (TV/Theater) Default speakers TVSets Network setting (p. 36) Network settingSets VIERA CAST setting (p. 38) VIERA CAST settingTurns TV On automatically when the cable box or a connected device is turned On (No/Set)• The “Sleep” timer, “On/Off timer”, and “First time setup” will not function if “Auto power on” is set. (p. 46) Auto power on NoTo conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performedfor more than 10 minutes. (Set/No)Note• Not in use when setting “Auto power on”, “On/Off Timer”, “Lock”, “SD Mode”, or Digital channel.• “No signal shut-off was activated” will be displayed for about 10 seconds when the TV is turned on forthe first time after turning the power off by “No signal shut-off”.• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.No signal shut-off SetTo conserve energy, the TV automatically turns off when no operation of remote or front panel keycontinues for more than 3 hours. (No/Set)Note• Not in use when setting “Auto power on” or “On/Off Timer” or PC input display.• “No action shut-off was activated” will be displayed for about 10 seconds when the TV is turned on forthe first time after turning the power off by “No action shut off”.• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.No action shut-off NoSet to “On”, if you light SD card LED while SD card is inserted. (On/Off ) SD card LED OnSet “On” to play back SD cards automatically. (Movie/Photo/Off/Select later) Play SD card automatically MovieDisplays TV version and software license. AboutPerforming Reset will clear all items set with Setup, such as channel settings. (p. 42) ResetAdjustments/Configurations (alternatives)Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital only/Analog only)Sets favorite channels. (p. 17)Displays Closed Caption. (p. 44) (Off/On)Changes the station identifier. (p. 43)Checks the signal strength if interference or freezing occurs on a digital image. (p. 43)(Continued)