- 28 -In each Viewing Mode, Contrast, Brightness, Colour, Tint, Sharpness, ColourTemperature, Vivid Colour, Ambient Sensor, Noise Reduction, MPEG NoiseReduction, Intelligent Frame Creation and 24p Smooth Film can be adjustedand stored.When in True Cinema or Custom mode, Advanced Settings can be adjustedadditionally. The settings in True Cinema or Custom mode can be stored foreach input.● You can set Viewing Mode in 2D and 3D mode for each.Ambient Sensor1. Display the menu with MENU2. Select Picture Ambient Sensor with / and press OK to access3. Select On / Off with / and press OK to setAmbient Sensor(On / Off)● Automatic Brightness Control functionAdjusts picture settings automatically depending on ambient lightingconditions.Auto power standby functionThe TV will automatically go into Standby mode in the following conditions:● Off Timer is active.Watching Basic Off Timer● No operation is performed for 4 hours while Auto Standby is set to On.Settings Timer Auto Standby● No signal is received and no operation is performed for 10 minutes whileNo signal Power off is set to On.Settings Timer No signal Power off= Note =● This function does not affect the recording of Timer Programming and OneTouch Recording.AspectChange the aspect ratio (image size) with ASPECT.● Enjoy viewing the image at its optimum size and aspect.