- 48 -Manual Tuning■ Digital TVNormally use Auto Tuning or Update Channel List to retune Digital TVchannels.If tuning has not been done completely or for adjusting the direction of theaerial, use this function.● All Digital channels found will be added to Channel List.1. Select physical channel with / and select offset with /2. Press OK to search■ Analogue TVSet Analogue TV channel manually after Auto Tuning.1. Select the channel position with numeric buttons2. Select the channel with Channel Up / Down button3. Search with /4. Select Store with / and press OK to set● If a VCR is connected only with the RF cable, select channel position 0.Update Channel ListBy updating the Digital TV channel list, you can add new channels, deleteremoved channels or change channel names and positions automatically.● The channel list is updated while keeping your settings in Favourites Edit,Channel List, Child Lock, etc.● Depending on the signal condition, the update may not work properly.New Channel MessageSelects whether to give a notification message when a new Digital TVchannel is found.● When a notification message appears, you can perform Update ChannelList pressing OK.● Sometimes, mainly during summer months at night, the TV may pick updistant TV stations outside your broadcast due to favourable short term