- 29 -■ To change the aspect ratio manually1. Display Aspect Selection list with ASPECT2. Select the mode with / and press OK to set● You can also change the mode pressing ASPECT.(Press repeatedly until you reach the desired mode.)16:9:Directly displays the image at 16:9 without distortion (anamorphic).14:9:Displays the image at the standard 14:9 without distortion.Just:Displays a 4:3 image full-screen. Stretching is only noticeable at the leftand right edges.4:3:Displays the image at the standard 4:3 without distortion.Zoom:Displays a 16:9 letterbox or 4:3 image without distortion.4:3 Full:Displays a 4:3 image enlarged horizontally to fit the screen.● For HD (High definition) signalsSidecut Just:Displays a 16:9 letterbox (anamorphic) image full-screen. Stretching isonly noticeable at the left and right edges.● For HD (High definition) signalsSidecut Zoom:Displays a 16:9 letterbox (anamorphic) image full-screen without distortion.● For HD (High definition) signals= Note =● Display the image (TV, external input, etc.) full-screen to use this functioncompletely.● Aspect mode can be memorised separately for SD (Standard definition)and HD (High definition) signals.● Aspect cannot be changed in 3D mode.Advanced SettingsYou can adjust and set up the detailed picture settings for each input whenViewing Mode is set to True Cinema or Custom.