- 41 -● If you select the current programme, a confirmation screen askingwhether you want to watch or record the programme appears. SelectTimer Programming with / and press OK to set USB HDD Rec. torecord from the time you finish the timer programming event setting.= Note =● Not valid in Analogue TV● Timer Programming only works reliably if correct time information isreceived via the signal from the broadcaster or service provider.● No other channels can be selected while the recording of TimerProgramming is in progress.● When recording programmes to the USB HDD, be sure to format the USBHDD and enable it to record in USB Device Setup.Recording USB HDD setup3DNote● Display the image (TV, external input, etc.) full-screen for viewing 3D.● If light appears to flicker under fluorescents or dimmers when using the 3DEyewear, change the setting of 3D Refresh Rate.Watching 3D 3D Settings● Do not exert pressure on or scratch the lens of the 3D Eyewear.● 3D content will not be correctly visible if the 3D Eyewear is worn upsidedown or back-to-front.● When viewing 3D images, make sure your eyes are at an approximatelyhorizontal level and keep a position where you do not see double images.● Do not wear the 3D Eyewear when watching something other than 3Dimages. Liquid crystal displays (such as computer screens, digital clocksor calculators, etc.) may be difficult to see while wearing the 3D Eyewear.● Do not use the 3D Eyewear as sunglasses.● 3D effects may be perceived differently depending on the person.
