- 47 -■ To change 3D format manuallyWhen the image is not changed properly using 3D / 2D mode, use thismanual setting.1. Display the 3D Mode Selection (Manual) screen with (red) duringabove operation2. Select the mode with / and press OK to setOriginal:Displays the source image as it is.● Use to identify the format type of the source image.Watching 3D Source image formatSide by Side - 3D / Side by Side - 2D / Top and Bottom - 3D / Top and Bottom- 2D:Displays the mode you select.● Not valid in Analogue TV and AV mode2D 3D:Converts 2D images into 3D.● Please note the 3D images appear slightly different from the originals.● Using this function for profit-making purposes, or publically showingimages converted from 2D to 3D in places such as shops or hotelsetc. may infringe on the rights of the copyright holder protected undercopyright law.3D Settings1. Display the menu with MENU2. Select Picture 3D Settings with / and press OK to access3. Select one of the following items with / and press OK to access3D Detection / 3D Signal Message / 3D Refresh Rate / 2D 3D Depth / 3DAdjustment / L/R Picture Swap / Edge Smoother / Safety Precautions4. Set with / / / and press OK to store● To exit the menu screenEXIT
