Features of the Set-Top BoxFEATURES OF THE SET-ToP BOXChannel and Program Tuning - DTVChannel and program tuning in digital television is very different from currentconventional television. In DTV, up to six (6) multiple programs can exist within asingle 6 MHz channel. These programs behave as subchannels within the singlechannel. When tuning to a channel, the STB will also tune to a program. Your STBwill indicate the channel and program through the on-screen Channel Banner display.Channel and Program TuningThe STB allows channel and program selection in the following ways:C3 Direct Tuning (0 ~ 9 keys) - Tunes directly to a channel or program.O Channel Up/Down Tuning (A or • buttons) - Tunes to the next or previous availablechannel or program.[3 Next Program Tuning (PROG button) - Tunes to the next program within a single 6 MHzchannel._1 Rapid Tuning (R-TUNE button) - Switches between the last two remembered channels orprograms.Next Program TuningThe PROG button on the remote control allows you to select programs within a single6 MHz channel. Each time the PROG button is pressed, the STB will move to the nextavailable program within the channel.Note: Only programs within the current 6 MHz channel can be selected using the PROGbutton. If only one (1) program appears, it indicates only one (1) program is available.Channel Tuning Using Certain Panasonic TelevisionsSome Panasonic television models* will automatically switch between using the STBor the TV to tune channels.DTVWhen the remote control is in DTV mode and either the 0 ~ 9 numeric keypad or theChannel Up/Down (A or • buttons) is used, the television will automatically switch toDTV input. Channel tuning will be done through the STB.TMWhen the remote control is in TV mode and either the 0 ~ 9 numeric keypad or theChannel Up/Down (A or • buttons) is used, the television will automatically switch toTV input. Channel tuning will be done through the TV.*Such as CT-32XF56, CT-36DV61, PT-56WXF95 and other future models.m