27Preset OperationColour SYSIf a clear picture with correct colours cannot be obtained, a change to the Colour System may improve the picture. Thetelevision should be switched ON and the TV/AV Switch set to AV1, AV2 or AV3.The Colour SYS is normally set to AUTO and generally does not need to be changed.Colour SYS Setting Using the Front Panel ControlsRF (Normal Television) MODE1. Open the front panel door.2. Push the PRE. Button three times.3. Press the Volume Up ( + ) or Volume Down ( - ) Button to switch between AUTO, PAL andNTSC-4.43.4. Return the television to normal operation by pushing the PRE. Button five times.AV (Audio / Video) MODE1. Open the front panel door.2. Push the PRE. Button once.3. Press the Volume Up ( + ) or Volume Down ( - ) Button to switch between AUTO, PAL, NTSC-4.43and NTSC-3.58.4. Return the television to normal operation by pushing the PRE. Button twice.Colour SYS Setting Using the Remote Control1. Push the MAIN MENU Button.2. Select the PRESET Menu using the Left ( ) or Right ( )Button. When the Preset symbol is highlighted, the PresetMenu has been selected.3. Push the Down ( ) Button to access the Colour SYS option.4. Press the Left ( ) or Right ( ) Button to switch betweenAUTO, PAL, NTSC-4.43 and NTSC-3.58.5. Push the MAIN MENU Button twice to return the television tonormal operationMAIN MENUPRESETAV1 PRESETCOLOUR SYS PALGEOMAGNETIC 0AV1 PRESETCOLOUR SYS AUTOGEOMAGNETIC 0AV1 PRESETCOLOUR SYS NTSC-4.43GEOMAGNETIC 0AV1 PRESETCOLOUR SYS NTSC-3.58GEOMAGNETIC 01 PRESETAUTO TUNEMANUAL TUNECOLOUR SYS AUTOFINE TUNESKIP OFFPOS. CHANGE 1GEOMAGNETIC 01 PRESETAUTO TUNEMANUAL TUNECOLOUR SYS PALFINE TUNESKIP OFFPOS. CHANGE 1GEOMAGNETIC 01 PRESETAUTO TUNEMANUAL TUNECOLOUR SYS NTSC-4.43FINE TUNESKIP OFFPOS. CHANGE 1GEOMAGNETIC 01 PRESETAUTO TUNEMANUAL TUNECOLOUR SYS NTSC-3.58FINE TUNESKIP OFFPOS. CHANGE 1GEOMAGNETIC 0