28Preset OperationFine TuningIn areas of poor reception or constant interference a slight adjustment to the tuning may improve the picturequality. The television should be turned ON and the TV/AV switch set to TV.Fine Tuning Using the Front Panel Controls1. Open the front panel door.2. Push the PRE. Button four times.3. Use the front panel Programme Number Up ( /\ ) or Down ( \/ )Buttons to select the Programme Location Number you want totune.4. Press the Volume Up ( + ) or Volume Down ( - ) Button to startthe Fine Tune.5. The fine tuning symbol ( ) will appear to the left of theProgramme Location Number indicator.6. When you are satisfied with your selection you can- fine tune more stations by repeating steps 3, 4 and 5- Return the television to normal operation by pushing thePRE. Button four times.Fine Tuning Using the Remote Control1. Push the MAIN MENU Button.2. Select the PRESET Menu using the Left ( ) or Right ( )Button. When the Preset symbol is highlighted, the PresetMenu has been selected.3. Use the front panel Programme Number Up ( /\ ) or Down ( \/ )Buttons to select the Programme Location Number you want totune.4. Push the Down ( ) Button to access the FINE TUNE option.5. Press the Left ( ) or Right ( ) Button to start the Fine Tune.6. The fine tuning symbol ( ) will appear to the left of the Pro-gramme Location Number indicator.7. When you are satisfied with your selection you can- fine tune more stations by repeating steps 4, 5 and 6.- Return the television to normal operation by pushing theMAIN MENU Button once.Canceling the Fine TuningTo cancel the Fine Tuning follow the Manual Tune procedure on page 26.MAIN MENU12CH 12FINE TUNE12 PRESETAUTO TUNEMANUAL TUNECOLOUR SYS AUTOFINE TUNESKIP OFFPOS. CHANGE 12GEOMAGNETIC 0PRESET