Panasonic TX-68PS12A Operating Instructions Manual

29Preset OperationSkip OperationThis option allows you to “SKIP” (bypass) the unused or undesired Programme Numbers. The Function is onlyapplicable when the Programme Number Up or down buttons are pressed. The use of the remote control DirectProgramme Number Buttons overrides the Skip function. The SKIP function is not available if FAVORITE CH hasbeen selected.Using Front Panel Controls1. Open the front panel door.2. Push the PRE. Button five times.3. Select the Programme Location Number you want to skip using thefront panel Programme Number Up or Down Buttons.4. Press the Volume Up ( + ) or Volume Down ( - ) Button to switch toSKIP ON.5. When you are satisfied with your selection you can-Skip more Programme Location Numbers by repeating steps 3 and 4.-Return the television to normal operation by pushing the PRE. Buttonthree times.Using the Remote Control1. Push the MAIN MENU Button.2. Select the PRESET Menu using the Left ( ) or Right ( ) Button. When the Preset symbol ishighlighted, the Preset Menu has been selected.3. Push the Down ( ) Button to access the SKIP option.4. Select the Programme Location Number you want to skip using the Remote Control ProgrammeNumber Up or Down Buttons.5. Push the Left ( ) or Right ( ) Button to switch to SKIP ON.6. When you are satisfied with your selection you can- Skip more Programme Location Numbers by repeating steps 4 and 5.- Return the television to normal operation by pushing the MAIN MENU Button twice.12CH 12FINE TUNE12 PRESETAUTO TUNEMANUAL TUNECOLOUR SYS AUTOFINE TUNESKIP OFFPOS. CHANGE 12GEOMAGNETIC 0How to Cancel the SkipTo cancel the Skip function follow the procedure outlined above. Use the appropriate button to switch toSKIP OFF.