- 43 -3) Press BACK/RETURN to store= Note =● If a VCR is connected only with the RF cable in Analogue mode, edit VCR.Auto SetupAutomatically retunes the channels received in the area.● This function is available if channel tuning is already performed.● Only the selected mode is retuned. All the previous tuning settings areerased.● If Child Lock PIN number has been set, the PIN number is required.Functions Child Lock PIN number● If tuning has not been done completely, set Manual Tuning.Watching Tuning and editing channels Manual Tuning■ DVB-C, DVB-T, Analogue channels1. Select Auto Setup with / and press OK to access2. Set DVB-C Auto Setup Settings with / / / and press OK to store(DVB-C)● Scan ModeFull:Scans the whole frequency range.Quick:Scans the suitable frequency in your country.● Normally set Frequency, Symbol Rate and Network ID to Auto. If Autois not displayed or if necessary, enter each value specified by your cableprovider with numeric buttons.● After settings, select Start scan with / and press OK to search.3. The confirmation screen is displayed and press OK to start Auto Setup(Settings are made automatically)● When the operation is completed, the channel at the lowest position willbe displayed.
