- 45 -– SC3: PAL D, K / SECAM D, K– F: SECAM L, L’1. Select the channel position with numeric buttons2. Select the channel with Channel Up / Down button3. Search with /4. Select Store with / and press OK to set● Use Fine Tuning to make small adjustments to the tuning of an individualprogramme (affected by weather conditions, etc.).● If a VCR is connected only with the RF cable, select channel position 0.Update Channel ListBy updating the DVB channel list, you can add new channels, delete removedchannels or change channel names and positions automatically.● The channel list is updated while keeping your settings in Favourites Edit,Channel List, Child Lock, etc.● Depending on the signal condition, the update may not work properly.New Channel MessageSelects whether to give a notification message when a new DVB channel isfound or not.● When a notification message appears, you can perform Update ChannelList pressing OK.Signal ConditionSelects a channel and checks the signal condition.A good Signal Strength is not an indication of suitable signal for DVB reception.● Use the Signal Quality indicator as follows.– Green bar: Good– Yellow bar: Poor– Red bar: Bad (Check the terrestrial aerial or cable)● Vertical lines show the maximum signal value of the selected channel.● To change the channel
