- 44 -■ Auto Setup using the buttons on the TV1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to displaythe menu2. Set Auto Setup with following control panel buttons● Move the cursor / select from a range of options / select the menu item(up and down only)● Access the menu / store settings after adjustments have been made oroptions have been set with INPUT/OK/HOLD for MENU button.Manual Tuning● Normally use Auto Setup or Update Channel List to retune DVB channels.● If tuning has not been done completely or for adjusting the direction of theaerial, use this function. (DVB)● All DVB channels found will be added to Channel List.■ DVB-C1. Enter the frequency with numeric buttons● Normally set Symbol Rate and Service ID to Auto.2. Select Start scan with / and press OK to search■ DVB-T1. Select a channel with / and adjust frequency with / for eachchannel● Set where the level of Signal Quality becomes the maximum.2. Press OK to search■ AnalogueSet Analogue channel manually after Auto Setup.● Set Sound System and Colour System, and then perform this function.Normally set Colour System to Auto.– SC1: PAL B, G, H / SECAM B, G– SC2: PAL I
