- 156 -Intelligent Auto StandbySet Intelligent Auto Standby to On in the Setup Menu to use this function.Settings Setup VIERA Link SettingsWhen the TV is on, non-used connected equipment goes into Standby modeautomatically to reduce the power consumption. For example, when the inputmode is switched from HDMI or when Speaker Selection is changed to TV(except for watching a disc).● This function may not work properly depending on the connectedequipment. In this case, set to Off.VIERA Link ControlYou can control some functions of the connected equipment with this TV’sremote control by pointing at the TV’s signal receiver.1. Display APPS List with APPS2. Select VIERA Link with / / / and press OK to access3. Select VIERA Link Control with / and press OK to access4. Select one of the following items with / and press OK to accessRecorder / Player / Home Cinema / Video Camera / LUMIX / DigitalCamera / Other(The menu of the accessed equipment will be displayed. The input modewill be changed automatically.)● The displayed item may vary depending on the connected equipment.● Home Cinema means Player theatre, Blu-ray Disc theatre or Recordertheatre.● Other means Tuner set top box.5. Follow the on-screen instructions to operate the menu of the equipment● Confirm the remote control code is “73”.Watching External equipment Operating with TV’s remote control● To display the operation guideOPTION(If other manufacturers’ product is accessed, Setup / ContentsSelection menu may be displayed.)● Available VIERA remote control buttons depend on the connectedequipment.■ If multiple recorders or players are connectedEach recorder / player is numbered. The number is given from the TV’slower number of HDMI terminal connected to the same type of equipment.
