- 67 -Update Channel ListBy updating the DVB channel list, you can add new channels, delete removedchannels or change channel names and positions automatically.● The channel list is updated while keeping your settings in Favourites Edit,Channel List, Child Lock, etc.● Depending on the signal condition, the update may not work properly.● To update DVB-S channels, set Satellite, Search Mode and Scan Modebefore updating.1) Select Satellite / Search Mode / Scan Mode with / and press OKto access2) Set each item with / and press OK to store3) After settings, select Start scan with / and press OK to searchNew Channel MessageSelects whether to give a notification message when a new DVB channel isfound or not.● When a notification message appears, you can perform Update ChannelList pressing OK.Signal ConditionSelects a channel and checks the signal condition.A good Signal Strength is not an indication of suitable signal for DVBreception.● Use the Signal Quality indicator as follows.– Green bar: Good– Yellow bar: Poor– Red bar: Bad (Check the terrestrial aerial, cable or satellite dish)● Vertical lines show the maximum signal value of the selected channel.● To change the channel● For DVB mode