- 65 -● Normally set Frequency, Symbol Rate and Network ID to Auto. If Autois not displayed or if necessary, enter each value specified by yourcable provider with numeric buttons.● After settings, select Start scan with / and press OK to search.3. The confirmation screen is displayed and press OK to start Auto Setup(Settings are made automatically)● When the operation is completed, the channel at the lowest position willbe displayed.■ Auto Setup using the buttons on the TV1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds todisplay the menu2. Set Auto Setup with following control panel buttons● Move the cursor / select from a range of options / select the menu item(up and down only)● Access the menu / store settings after adjustments have been made oroptions have been set with INPUT/OK/HOLD for MENU button.Manual Tuning● Normally use Auto Setup or Update Channel List to retune DVB channels.● If tuning has not been done completely or for adjusting the direction of theaerial or dish, use this function. (DVB)● All DVB channels found will be added to Channel List.■ DVB-S1. Select Satellite with / and set with /● Please consult the received satellite broadcasting companies for thesetting.2. Select Transponder Frequency / Symbol Rate / Polarisation / Modulation /Service ID with / and set with / or numeric buttons3. Select Start scan with / and press OK to search