35Technical InformationNetworkWhen the power saving function is running, communications software may malfunc-tion. For example, communications may be halted if the standby (hibernation) modeis activated. The computer must be restarted if one of these modes is entered duringdata communications.Be sure that the power of the display is cut (for energy conservation purposes) or thecomputer enters standby (hibernation) mode after the communications software isclosed.The network connection may be severed under the condition the power of the displayis off (for energy conservation purposes) and standby (hibernation) mode.When network or communication software is to be used, set [Sys-tem standby], [Turn off monitor] and [Turn off hard disks] (in [Start] -[Settings] - [Control Panel] - [Power Management]) to [Never].When network or communication software is to be used, set [Sys-tem standby] and [System hibernates], [Turn off monitor] and [Turnoff hard disks] (in [Start] - [Settings] - [Control Panel] - [Power Op-tions]) to [Never].Windows 98Windows 2000Windows Security FunctionWindows 2000 has a security function that differs from the security function of the SetupUtility. For detailed information, refer to the Windows help.Set the password for secrecy and protection.Only an account for the Administrator is created the first time the computer isstarted. Create accounts for person who are actually going to use a computer.We recommend using an NTFS file system in order to use the Windows securityfunction.Windows 2000NOTE