Panasonic Toughbook CF-S9KWAZG1M Reference Manual

Also see for CF-C1 Series: Supplementary instructions Operating instructions Operating instructions Reference manual Reference manual

45Battery PowerSwitching the battery’s Economy Mode (ECO)1 Click on the notification area and then click .2 Click [Enabled] or [Disabled] in [The battery’s Economy Mode (ECO)].1 Right-click either (Disable) or (Enable) on the notification area.If or is not displayed, click [start] - [All Programs] - [Panasonic] - [Battery] - [Economy Mode(ECO) Setting Utility].2 Click [Economy Mode(ECO) Enable] or [Economy Mode(ECO) Disable].A When the confirmation message is displayed, read the message on the screen carefully, and click [OK].B Use the computer with the AC adaptor unplugged until the remaining battery power is 80% or less.When the remaining battery power falls to 80% or less, battery discharge ends, and the Economy Mode (ECO)indicator lights.If you continue using the computer with the AC adaptor, it may take about a day until the remaining batterypower falls to 80%.C When the confirmation message is displayed, read the message on the screen carefully, and click [OK].D Connect the AC adaptor.If you do not click [OK] at step C, the computer will go into forced sleep/ standby afterabout three minutes to prevent the remaining battery power from dropping.• The computer will go into forced sleep/ standby even while application software isrunning or data is being sent or received, or when the hard disk is being accessed, so be sure to connectthe AC adaptor.[Enabled]/ [EconomyMode(ECO) Enable][Disabled]/[EconomyMode(ECO) Disable]Remaining battery power:81% or more.Remaining battery power:80% or less.Economy Mode (ECO)IndicatorBlink(The battery will dischargeuntil the remaining batterypower is 80% or less.)Light offWindows 7Windows XPWindows 7 Windows XP Windows 7Windows XPWindows 7 Windows XPWindows 7 Windows XP