Panasonic Toughbook CF-W4GWCZZBM Operating Instructions Manual

Also see for CF-W4 Series: Operating instructions Reference manual

Setup Utility32Getting StartedNOTEz The [Advanced] menu cannot be changed when the Setup Utility is started up with the User Password.NOTEz When the Setup Utility is started up with the User Password, only a limited number of items can be displayedand set. (Î page 29)z [SD Startup], [SD Setting Method] and [Clear registered SD card] will be displayed only when an SD memorycard has been registered.z When starting up the computer, if the message [Hard disk access is prohibited “Hard Disk Lock”] appears, startup the Setup Utility, and reset the details to match the settings when [Hard Disk Lock] was set.CD/DVD Drive Power• You can set the drive power to [On] or [Off] when the computer is started up.• When set to [Off]:• From the next time you start the computer, you will be unable to start up fromDVD-ROM & CD-R/RW drive. The disk cover cannot be opened until Win-dows has started. To start up from the DVD-ROM & CD-R/RW drive (givepreference to [USB CDD] (internal DVD-ROM & CD-R/RW drive) in the[Boot] menu), set this to [On].• If operations are resumed from hibernation mode while a disk is set, it maytake about 20 seconds for operations to resume.• The drive power cannot be turned on/off with the drive power/open switch until Windowsstarts, regardless of the current on/off status.OffOnBattery Charging Indicator• Set the battery indicator to turn on or flash while the battery pack is recharging.On ContinuousFlashing(An underline indicates the factory default settings)Advanced Menu(An underline indicates the factory default settings)Modem• Select whether to use the internal modem function ([Enable]) or not ([Disable]).(This does not work for the external modem.)DisableEnableLAN• Select whether to use the internal LAN function ([Enable]) or not ([Disable]).(This does not work for the external LAN card.)DisableEnableWireless LAN• Select whether to use the internal wireless LAN function ([Enable]) or not ([Disable]).(This does not work for the external wireless LAN card.)DisableEnableLegacy USB Support• Select whether to use the function that makes the computer recognize internal DVD-ROM& CD-R/RW drive, USB keyboard and USB floppy disk ([Enable]) or not ([Disable]) beforestarting Windows.DisableEnableSecurity Menu(An underline indicates the factory default settings)Execute-Disable Bit Capability• When [Execute-Disable Bit Capability] is set to [Enable], it means that this computer sup-ports hardware-based Data Execution Prevention (DEP). It should usually be set to[Enable]. DEP is a set of hardware and software technologies that perform additionalchecks on memory to help prevent malicious code from running on a system.DisableEnable