Panasonic Toughbook CF-W5LCEZZBM Reference Manual

Also see for CF-W5 series: Supplementary guide Supplementary instructions Operating instructions Operating instructions User manual

111Check the Computer’s Usage StatusYou can check the computer’s usage status in the PC Information Viewer. You may need this information when calling yourtechnical support office for advice.NOTEz This computer periodically records the management information including the hard disk information such as number ofhours powered-on, number of times powered-on, internal temperature, replacement sector. The maximum data vol-ume for each record is 750 byte.These information are only used for estimating the cause when the hard disk goes down by any possibility. They arenever sent to outside via network nor used for any other purpose except for the purpose described the above.To disable the function, add the check mark for [Disable the automatic save function for management information his-tory] in [Hard Disk Status] of PC Information Viewer, and click [OK].z If you have not logged on with the administrator authority, some information will be displayed as [Not Found].z As long as it is activated, the PC Information Viewer will appear in front of all other screens. Running PC Information ViewerA Click [start] - [All Programs] - [Panasonic] - [PC Information Viewer] - [PC Information Viewer].Click the items to display detailed information for each item.z The [PC Information Viewer] screen is always displayed on the top of every other screen. Save information to a fileDisplayed information can be saved to a text file (.txt).A Run the PC Information Viewer and display the information you wish to save.B Click [Save].z To save the item that is displayed.Click [Save only the information displayed] and click [OK].Some of the hidden information on the screen, which cannot be shown without scrolling the screen, will besaved, too.z To save all items.Click [Save all the information] and click [OK].C Select the folder, input the file name, and then click [Save].z If automatic saving of the management information record has not been disabled, the records already recorded arealso saved. Save a copy of the screen to a fileYou can save a copy of the screen currently being displayed to a file in bitmap format (.bmp).A Display the screen you want to save.