Computer Interfacing17English■ Installing Drivers / Board ImageCaptureThe USB, printer, TWAIN driver and Board ImageCapture are installed in your computer by followingprocedures.Note• Do not yet connect a USB cable to theelectronic board.1 Power on your computer and start Windows* 1 .• Log on as an administrator for Windows 2000,Windows XP, Windows Vista or Windows 7.*1 Microsoft® Windows® operating system(hereafter Windows)2 Insert the CD-ROM into the CD-ROM drive.The Setup window appears automatically.• Depending on the operating system or thesettings that you are using, the Setupwindow may not appear automatically.In such a case, execute “Menu.exe” in theCD-ROM from the Explorer.• If the Autoplay dialog box appears inWindows Vista or Window 7, click “RunMenu.exe”.3 When “Welcome” window appears, click [Next].4 Click [Install Panaboard Software].• If “User Account Control” window isdisplayed in Windows Vista, select[Continue] to continue the installation.• If “User Account Control” window isdisplayed in Windows 7, click [Yes] tocontinue the installation.• To read the operating instructions in theprovided CD-ROM, the Adobe Reader orAcrobat® Reader must be installed in yourcomputer. It can be downloaded from theAdobe’s Web site if Internet is available.5 Read “End-User License Agreement” carefullyand click [Yes].6 When the following window appears, checkthat the electronic board is not connected toyour computer and click [OK].• If “Windows can't verify the publisher of thisdriver software” is displayed in WindowsVista or Windows 7, select “Install this driversoftware anyway” to continue the installation.• For Windows 98 or Windows Me, a floppydisk or CD-ROM for installing the operatingsystem may be required.• If the screen prompts to restart Windows,restart Windows.