Panasonic UB-5310 Operating Instructions Manual

Also see for Panaboard UB-5310: Brochure & specs Operating instructions Operating instructions Installation manual Specification sheet

Panasonic UB-5310 Operating Instructions Manual Manual pdf 18 page image

Computer Interfacing187 When the following window appears after filesare copied, power the electronic board on, andconnect a USB cable from the electronicboard to your computer.8 Follow the on-screen instructions if the wizardwindows appear.• If the wizard window is displayed to selectthe file (##.inf) for the printer driver inWindows XP, select “windows\inf\oem##.inf”.• If the wizard window is displayed to connectto the Windows Update in Windows XP SP2,select [No].• If the warning dialog is displayed inWindows 2000 / Windows XP, select [Yes] or[Continue Anyway] to continue theinstallation. In Windows Vista or Windows 7,no warning window is displayed andinstallation will continue.• The new hardware wizard windows may bedisplayed several times depending on theoperating system.• For Windows 98 or Windows Me, a floppydisk or CD-ROM for installing the operatingsystem may be required.9 When the installation is completed, click [OK].Note• If the Panaboard is powered on and connected tothe computer with a USB cable when [Exit] isclicked after the installation is completed, the BoardImage Capture software will automatically start inWindows 2000 / Windows XP / Windows Vista /Windosw 7. (For further details, refer to “Scanningwith the Board Image Capture” on page 20.)■ Installing Quick Image Navigator /Panasonic-DMSAfter confirming your operating system, install thesoftware.For Windows 2000 / Windows XP / Windows Vista /Windows 7: Quick Image NavigatorFor Windows 98 / Windows Me: Panasonic-DMSIf Panasonic-DMS is already installed, you do notneed to uninstall it.1 Power on your computer and start Windows.• Log on as an administrator for Windows 2000,Windows XP, Windows Vista or Windows 7.2 Insert the CD-ROM into the CD-ROM drive.The Setup window appears automatically.• Depending on the operating system or thesettings that you are using, the Setupwindow may not appear automatically.In such a case, double-click “Menu.exe” inthe CD-ROM from the Explorer.• If the Autoplay dialog box appears in WindowsVista or Windows 7, click “Run Menu.exe”.3 When “Welcome” window appears, click [Next].4 Click [Download Quick Image Navigator].• To download Quick Image Navigator andPanasonic-DMS, your computer must beable to access the Internet.