Panasonic UB-5335 Operating Instructions Manual

Also see for UB-5335: Brochure Manual Installation manual

Panasonic UB-5335 Operating Instructions Manual Manual pdf 29 page image

Setting the Unit291 UsingIt is possible to select the file format for outputtingimages to a USB flash memory device or computer.1 Press .• The unit will switch to setting mode, and“ ” is displayed in the Display Window.2 Press or to select “ ”.3 Press to change the settings.• Each time is pressed the setting isswitched, and the display on the DisplayWindow changes.4 Press .• The unit will return to ready mode.Set the operation to be performed when the poweris turned off.1 Press .• The unit will switch to setting mode, and“ ” is displayed in the Display Window.2 Press or to select “ ”.3 Press to change the settings.• Each time is pressed the setting isswitched, and the display on the DisplayWindow changes.4 Press .• The unit will return to ready mode.It is possible to set the output size of the scannedimage to be enlarged vertically or be the same sizeas the original.1 Press .• The unit will switch to setting mode, and“ ” is displayed in the Display Window.2 Press or to select “ ”.3 Press to change the settings.• Each time is pressed the setting isswitched, and the display on the DisplayWindow changes.4 Press .• The unit will return to ready mode.Note• The output size can be set only with the UB-5835and UB-5865. It is not displayed with theUB-5335 and UB-5365.• When you copy the screen by pressing the2-Screen Copy Key, the output size of scannedimages is always copied as “Enlarged vertically”.Setting file formatDisplay Window SettingsFile format: PDFFile format: TIFFAuto power-off settingDisplay Window SettingsIf the electronic board isnot used for about anhour, its power will beautomatically turned off.Turn off the power usingthe Power Key.Setting output sizeDisplay Window SettingsOutput size: EnlargedverticallyOutput size: Same size[Enlarged vertically] [Same size]