Panasonic UF-9000 Service Manual

Contents

164UF-9000JAN 2004Ver. 1.0DP-180/190061 TX/RX/PRT/CPY TX:****** PRT:******RX:****** CPY:******Displays the transmitted, received, total printed andcopied document count.062 Print Counter 1 = Off2 = OnSelects whether to print in the Fax Parameter List,the counter information that is displayed in theFunction Parameter No. 61.063~067Not Used068 NYSE FaxForward(USA and CanadaOnly)1 = Off2 = OnSelects whether the machine will forward theincoming and outgoing faxes to a specified station.Note:Once this parameter is activated, FaxForwarding via Fax Parameter 054 isautomatically disabled, an Access Code of"0000" is automatically assigned and FaxParameter 038 has a new setting added called"NYSE".069 NYSE Local Print(USA and CanadaOnly)1 = Inc2 = On (Always)Selects the printing condition for the incoming faxesafter FAX Forwarding.INC. : Prints only if FAX Forwarding fails.ON : Always prints.070 Line Error 128 lines256 lines512 lines1024 line2048 linesOff(will not disconnect line)1. Selects the line disconnect condition duringreception. If the number of line errors exceed thissetting, the unit will disconnect the line.Press “V” or “/\ “ to select the symbol rate.2. Selects the transmit condition of RTP/PIP orRTN/PIN.(Available if No.73 Error Detect is set to "LINES")(See Note 1)071 Total Error 1 = 5%2 = 10%3 = 15%4 = 20%Selects the transmit condition of RTP/PIP or RTN/PIN.(Available if No.73 Error Detect is set to "RATE".)(See Note 2)072 Continuous Error 1 = Off (unlimited)2 = 3 lines/STD3 = 6 lines/STD4 = 12 lines/STDSelects the continuous total error criteria of Off/3/6or 12 lines in Standard mode. If continuous totalerror exceeds this setting, the unit will transmitRTN/PIN.(Available if No.73 Error Detect is set to "RATE".)073 Error Detect 1 = Lines2 = RateSelects the error detect condition Lines/Rate.074 RTN Receive 1 = Disconnect2 = ContinueSelects whether to disconnect the phone line orcontinue when "RTN" is received.075 Coding 1 = MH (MH only)2 = MR (MH or MR)3 = MMR(MH or MR or MMR)4 = JBIGSelects the coding scheme.076 Batch TX(USA and CanadaOnly)1 = Off2 = OnSelects whether the batch transmission is available.077 RX JAM Length 1 = Off (unlimited)2 = 2 mSelects the maximum length of a receiveddocument that can be printed.Function Parameter TableNo. Parameter Selections Function