196UF-9000JAN 2004Ver. 1.0DP-180/1908.2. Installing the Printer Controller Module for PCL6(DA-PC190: UF-9000; DA-PC188: DP-180/190)8.2.1. ContentsNote:1.The part number may differ depending on the Destination.2. Refer to the Parts List in the Parts Manual.8.2.2. Installation1. Before installing this option, make sure the Program Expansion Board (DA-EM600) is installedinto Slot 1 on the SC PC Board first. Refer to the Installation Instruction of the ProgramExpansion Board (DA-EM600).2. Install the Hardware Key by following the steps below.CAUTION!Turn the Power Switch on the Left Side of the machine to the OFF position, and thenunplug the AC Power Cord before beginning installation. (During a Lightning Storm, toprevent electrocution disconnect the Telephone Line Cable first before unplugging theAC Power Cord.)Qty. Description Part No. Remarks1 Hardware Key ----- PCL KEY1 Software CD DZHP009971 Includes Operating Instructions1 License Agreement DZSH000112 For USA and Canada only1 DZSH000113 For Other Destinations1 Installation Instructions DZSM000795 This document(1) Remove the Rear Paper Tray Cover.(2) Remove 5 Silver Screws.(3) Remove the Right Cover.
