Panasonic VDR-D150GN Operating Instructions Manual

Also see for VDR-D150GN: Service manual Service manual Service manual

Contents

Panasonic VDR-D150GN Operating Instructions Manual Manual pdf 96 page image

MenusOthers96LSQT1052∫ [ DISPLAY]≥ OFF ≥ ONThe screen indications are selected as shownin the illustration below.∫ [ POWER SAVE]≥ OFF ≥ 5 MINUTES[OFF]:The power saving function is not activated.[5 MINUTES]:When about 5 minutes passed without anyoperation, this unit automatically turns off toprevent the battery from running down. Whenyou use this unit, turn it on again.≥ In the following cases, the unit may not turnoff even when you set this to [5 MINUTES].– When using the AC adaptor– When connecting the unit to a computer orprinter via the USB cable∫ [ BEEP SOUND]≥ OFF ≥ ONThis allows operations such as starting andending recording to be signaled by a beep.When [OFF] is set, no beep is heard when anoperation such as recording is started orended.1 BeepWhen you start recordingWhen you turn on the powerWhen this unit is recognized by the computer orthe printer, etc.2 BeepsWhen you pause recordingWhen you turn off the power2 Beeps for 4 timesWhen an error occurs e.g. recording notstarting. Check the sentence displayed on thescreen. (l 99)∫ [ INITIAL SET]≥ YES ≥ NOWhen there is a menu that cannot be selecteddepending on a combination of functions, set to[YES] for changing the menu settings back tothe initial shipping condition.(Language setting cannot be back to the initialshipping condition.)∫ [ DEMO MODE]≥ OFF ≥ ONThis item is used to start the unitdemonstration.(Only when using the AC adaptor and the modedial is at the or position)If you set this to [ON] without inserting a disc oran SD card, this unit is automatically set to thedemonstration mode for introducing itsfunctions. If any button is pressed or operated,the demonstration mode is cancelled. If nooperations take place for approx. 10 minutes,the demonstration mode automatically starts.To terminate the demonstration mode, insert adisc or an SD card, or set this to [OFF]. Fornormal use, set this function to [OFF].∫ [ USB FUNCTION]≥ PictBridge ≥ PC CONNECT[PictBridge]:When you connect the unit to a printer via theUSB cable.[PC CONNECT]:When you connect the unit to a computer viathe USB cable.Setup menuOFFON;15:3015.12.2006;R 0h00m 0h00m00s15:3015.12.2006SPDEMOLSQT1052(ENG).book 96 ページ２００５年１２月２１日水曜日午後６時５０分