32LSQT1157Setup3 Insert/remove the SD card into/from the card slot.≥ When inserting an SD card, face the label sideA upwards and press it straight in as far as itgoes.≥ When removing the SD card, press the centreof the SD card and then pull it straight out.4 Securely close the card slotcover.∫ Concerning the SD card≥ Electrical noise, static electricity or failure ofthis unit or the SD card may damage or erasethe data stored on the SD card. Werecommend saving important data on acomputer.∫ Card access lamp≥ When this unit accesses the SD card (reading,recording, playback, erasing, etc.), the accesslamp lights up.≥ If the following operations are performed whenthe access lamp is lit, then the SD card or therecorded data may be damaged or this unitmay malfunction.sRemoving the SD cardsOperating the OFF/ON switch or the modedialsRemoving the battery or disconnectingthe AC adaptorSelecting a modeThe mode dial is used to switch betweenrecording and playback modes.Rotate the mode dial slowly but surely.Rotate the mode dial, and set thedesired mode pictograph to theposition shown in the illustration.≥ Do not forcefully rotate the dial.How to use the joystickThis unit has a joystick for selecting functions,performing operations, etc. so it is easy tooperate this unit with one hand.Operations on the menu screen and selection offiles on the thumbnail view screen, etc.AVideo recording mode (l 42)Use this to record motion pictures on adisc.Video playback mode (l 60)Use this to play back motion pictures ona disc.Picture recording mode (l 45)Use this to record still pictures on anSD card.Picture playback mode (l 64)Use this to play back still pictures on anSD card.Basic operationsLSQT1157_EB.book 32 ページ 2006年12月11日 月曜日 午後8時46分