Panasonic VDR-D220EB Operating Instructions Manual

Also see for VDR-D220EB: Service manual

Contents

Panasonic VDR-D220EB Operating Instructions Manual Manual pdf 58 page image

58LSQT1157Recording1 Select [ ], fill the screen with awhite subject.2 Move the joystick up to select[ ].When the [ ] display changes from flashing toon, setting is complete.≥ When the [ ] display continues flashing, thewhite balance cannot be set because the placeis dark etc. In this case, use the automaticwhite balance.∫ About the white balance sensor AThe white balance sensor detects the type oflight source during recording.Do not cover the white balance sensor duringrecording, or it may not function properly.∫ About the black balanceadjustment (VDR-D310)This is one of the 3CCD system functions thatautomatically adjusts the black when the whitebalance is set in the manual adjustment mode.When the black balance is adjusted, the screenwill temporarily be black. (The black balancecannot be adjusted manually.)1 Black balance adjustment in progress.(Flashes.)2 White balance adjustment in progress.(Flashes.)3 Adjustment completed. (Lights up.)≥ When the unit is turned on with the lens capattached, the automatic white balanceadjustment may not function properly. Pleaseturn the unit on after removing the lens cap.≥ When the [ ] display flashes, the manualwhite balance previously adjusted is stored.Whenever recording conditions change, re-setthe white balance for correct adjustment.≥ When setting both the white balance and theiris/gain, set the white balance first.(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)Shutter Speed:Adjust it when recording fast-moving subjects.Aperture:Adjust it when the screen is too bright or toodark.¬ Rotate the mode dial to select or.1 Set the AUTO/MANUAL/FOCUSswitch to MANUAL.The icon shown in the illustration is displayedautomatically.To set the white balance manuallyMNLBACKBACKBACKBACKMNLBACKBACKBACKAManual shutter speed/aperture adjustment1 2 3MNL3/33/3 NEXTNEXT3/3 NEXTLSQT1157_EB.book 58 ページ２００６年１２月１１日月曜日午後８時４６分