2LSQT1161Information for Your SafetyIF THE POWER CORD OF THIS EQUIPMENTIS DAMAGED, IT MUST BE REPLACED WITHAN ELECTRICALLY APPROVED POWERCORD.Use only the recommended accessories.≥ Do not use any other AV/S cables and USBcables (VDR-D310) except the supplied one.≥ When you use the cable which are soldseparately, please make sure to use the onewhose length is less than 3 meters.-If you see this symbol-WARNING:TO REDUCE THE RISK OF FIRE,ELECTRIC SHOCK OR PRODUCTDAMAGE,≥ DO NOT EXPOSE THIS APPARATUS TORAIN, MOISTURE, DRIPPING ORSPLASHING AND THAT NO OBJECTSFILLED WITH LIQUIDS, SUCH AS VASES,SHALL BE PLACED ON THEAPPARATUS.≥ USE ONLY THE RECOMMENDEDACCESSORIES.≥ DO NOT REMOVE THE COVER (ORBACK); THERE ARE NO USERSERVICEABLE PARTS INSIDE. REFERSERVICING TO QUALIFIED SERVICEPERSONNEL.CAUTION!≥ DO NOT INSTALL OR PLACE THIS UNITIN A BOOKCASE, BUILT-IN CABINET ORIN ANOTHER CONFINED SPACE.ENSURE THE UNIT IS WELLVENTILATED. TO PREVENT RISK OFELECTRIC SHOCK OR FIRE HAZARDDUE TO OVERHEATING, ENSURE THATCURTAINS AND ANY OTHERMATERIALS DO NOT OBSTRUCT THEVENTILATION VENTS.≥ DO NOT OBSTRUCT THE UNIT’SVENTILATION OPENINGS WITHNEWSPAPERS, TABLECLOTHS,CURTAINS, AND SIMILAR ITEMS.≥ DO NOT PLACE SOURCES OF NAKEDFLAMES, SUCH AS LIGHTED CANDLES,ON THE UNIT.≥ DISPOSE OF BATTERIES IN ANENVIRONMENTALLY FRIENDLYMANNER.The socket outlet shall be installed near theequipment and easily accessible.The mains plug of the power supply cord shallremain readily operable.To completely disconnect this apparatus fromthe AC Mains, disconnect the power supplycord plug from AC receptacle.Product Identification Marking is located onthe bottom of unit.CLASS 1LASER PRODUCT IEC 60825-1:2001CAUTIONThis product contains a laser diode of higherclass than 1. To ensure continued safety, donot remove any covers or attempt to gainaccess to the inside of the product. Refer allservicing to qualified personnel.Information on Disposal in other Countriesoutside the European UnionThis symbol is only valid in theEuropean Union.If you wish to discard thisproduct, please contact yourlocal authorities or dealer andask for the correct method ofdisposal.