74LSQT1161Disc and card management(-RW‹V›)¬ Rotate the mode dial to select .1 Press the MENU button, thenselect [DISC SETUP] #[UN-FINALIZE] # [YES] andpress the joystick.2 When the confirmation messageappears, select [YES], then pressthe joystick.≥ When un-finalizing is complete, press theMENU button to exit the message screen.≥ DVD-RW (VR format) cannot be un-finalized.DVD-RW (VR format) after finalization can berecorded and edited in the same way as DVD-RW (VR format) before finalization.≥ DVD-R cannot be un-finalized.≥ When you un-finalize the disc, use a batterywith sufficient battery power or the AC adaptor.(RAM) (-RW‹VR›)This is for preventing recorded contents frombeing deleted or edited by mistake.Further recording and editing is not possible onprotected discs until the protection is released.¬ Rotate the mode dial to select .1 Press the MENU button, thenselect [DISC SETUP] #[DISC PROTECT] and press thejoystick.2 When the confirmation messageappears, select [YES], then pressthe joystick.To release disc protection1) Press the MENU button, then select[DISC SETUP] # [DISC PROTECT] andpress the joystick.2) When the confirmation message appears,select [YES], then press the joystick.≥ If the disc has been protected on another device,it may not be possible to release the protection onthis unit. In this case, release the protection on thedevice that you used to protect it.(RAM) (-RW‹VR›) (-RW‹V›)Please be aware that if a disc is formatted, thenall the data recorded on the disc will be erased.¬ Rotate the mode dial to select or.1 Press the MENU button, thenselect [DISC SETUP] #[FORMAT DISC] # [YES] andpress the joystick.Un-finalizing a DVD-RWThis is for un-finalizing a DVD-RW(Video format) so that it can be usedfor recording.Protecting a discMENUFormatting discsThis is for initializing discs.MENUMENU