71LSQT1161Editing≥ If files conforming to DCF standard aredeleted, all the data related to the files will bedeleted.(SD)Still picture files recorded on an SD card can belocked so that they are not deleted by mistake.(However even if you lock some files on an SDcard, formatting the card will delete all the files.)¬ Rotate the mode dial to select .1 Press the MENU button, thenselect [PHOTO SETUP] #[LOCK] # [YES] and press thejoystick.2 Select the file to be protected,then press the joystick.[ ] display appears and the selected file islocked.≥ Press the joystick again to release the locksetting.≥ You can also select multiple files in succession.To complete the settingsPress the MENU button.(SD)You can write the data of the still pictures to beprinted and the number of prints (DPOF data)onto the SD card.¬ Rotate the mode dial to select .1 Press the MENU button, thenselect [PHOTO SETUP] #[DPOF SET] # [SET] and pressthe joystick.2 Select the file to be set, thenpress the joystick.The number of prints set to be in DPOF isdisplayed.3 Move the joystick up or down toselect the number of prints, thenpress the joystick.≥ You can select from 0 to 999. (The selectednumber of pictures can be printed with theprinter supporting DPOF.)≥ To cancel the setting, set the number of printsto [0].≥ You can also select multiple files in succession.To complete the settingsPress the MENU button.Locking still picturesThis is for preventing still picture filesfrom being deleted by mistake.MENUDPOF settingThis is for writing the printing data onan SD card.MENU
