33LSQT1328Recording(Basic)2 Recording motion pictures(RAM) (-RW‹VR›) (-RW‹V›) (-R) (-R]DL)≥ Open the lens cover before turning the unit on.1 Rotate the mode dial to selectand open the LCD monitor orextend the viewfinder.2 Press the recording start/stopbutton to start recording.To end the recordingPress the recording start/stop button again.≥ [¥] and [;] are red during recording. Do notmove this unit until [;] is green.≥ The images recorded between pressing therecording start/stop button to start recordingand pressing it again to pause recordingbecome one scene.≥ When about 5 minutes have passed withoutany operation in recording pause, this unitautomatically turns off to save battery life. Touse this unit, turn it on again.This power save feature can also be set to[OFF]. (l 27, [POWER SAVE])∫ Screen indicationsA Recording modeB Remaining time left for recordingWhen the remaining time is less than1 minute, [R 0min] flashes red.C Recording time elapsedEach time the unit enters the recordingpause mode, the counter display will be resetto “0h00m00s”.≥ Maximum number of scenes on one side of adisc: 999Maximum number of dates on one side of adisc: 99(In some cases, scenes shot on the same daywill be recorded with different dates (l 52))When either of them reaches to the maximumlimit, more scenes cannot be recorded.≥ While motion picture recording is in progress,the recording will not stop even if the LCDmonitor is closed and the viewfinder isretracted.0h00m10s0h00m10s0h00m10sSPR 30minR 30minR 30minABC
