48LSQT1328Whenever recording conditions change, re-setthe white balance for correct adjustment.≥ When setting both the white balance and theiris/gain, set the white balance first.Shutter Speed:Adjust it when recording fast-moving subjects.Aperture:Adjust it when the screen is too bright or toodark.1 Select the manual mode. (l 45)2 Select [ ] or [ ] with thejoystick.3 Adjust the settings with thejoystick.A Shutter speed:1/25 to 1/80001/25 to 1/500≥ The shutter speed closer to 1/8000 is faster.≥ If [AUTO SLW SHTR] is set to [OFF], theslowest shutter speed is 1/50.B Iris/Gain value:CLOSE # (F16 to F2.0) # OPEN # (0dB to18dB)≥ Value closer to [CLOSE] darkens the image.≥ Value closer to [18dB] brightens the image.≥ When the iris value is adjusted to brighter than[OPEN], it changes to the gain value.To restore to automatic adjustmentPress the AUTO button.≥ When setting both the shutter speed and theiris/gain value, set the shutter speed and thenset the iris/gain value.∫ Manual shutter speed adjustment≥ Avoid recording under fluorescent light,mercury light or sodium light because thecolour and brightness of the playback imagemay change.≥ If you increase the shutter speed manually, thenoise on the screen may increase.≥ You may see vertical lines of light in theplayback image of a brightly shining subject orhighly reflective subject, but this is not amalfunction.≥ During normal playback, image movementmay not look smooth.≥ When recording in an extremely bright place,the screen may change colour or flicker. If soadjust the shutter speed manually to [1/50] or[1/100].∫ Manual iris/gain adjustment≥ If the gain value is increased, the noise on thescreen increases.≥ Depending on the zoom magnification, thereare iris values that are not displayed.Manual shutter speed/aperture adjustmentMNL3/33/3 NEXTNEXT3/3 NEXTOPENOPEN1/1001001/100OPENMNLBACKBACKBACKAB