Panasonic VDR-D50 Operating Instructions Manual

Also see for VDR-D50: Brochure & specs Operating instructions

Contents

Panasonic VDR-D50 Operating Instructions Manual Manual pdf 44 page image

44LSQT1328Recording(Advanced)2 Recording functions ofmenus¬ Rotate the mode dial to select or .Guideline function:≥ The guidelines do not appear on the imagesactually recorded.≥ The guidelines are not displayed while rotatingthe LCD monitor frontward to record yourself.Wind noise reduction function:≥ The wind noise reduction depends on the windstrength. (If this function is activated in strongwinds, the stereo effect may be reduced. Whenthe wind weakens, the stereo effect will berestored.)Auto slow shutter mode:≥ When the auto slow shutter mode is selected,the slowest shutter speed changes from 1/50to 1/25.≥ When the shutter speed becomes 1/25, thescreen display may be seen as if frames aremissed and afterimages may appear.≥ If the scene is low in brightness or contrast, thesubject may not be focused in on.MenusGuideline/Aspect ratio/Wind noise reduction/Auto slow shutterFunction Effect/Setting methodGuideline function (RAM)(-RW‹VR›)(-RW‹V›)(-R)(-R]DL)(SD)You can check if the image is level while recordingby using the guidelines displayed on the screen.Select the menu. (l 26)[BASIC] # [GUIDE LINES] # [ON]≥ To cancel the function, select [OFF].Aspect ratio (RAM)(-RW‹VR›)(-RW‹V›)(-R)(-R]DL)This allows you to record images compatible withwide-screen TVs (16:9) and regular TVs (4:3).Select the menu. (l 26)[BASIC] # [REC ASPECT] # [16:9] or [4:3]≥ The default setting is [16:9].Wind noise reductionfunction (RAM)(-RW‹VR›)(-RW‹V›)(-R)(-R]DL)This reduces the winding noise picked up by themicrophone.Select the menu. (l 26)[ADVANCED] # [WIND CUT] # [ON]≥ The default setting is [ON].≥ To cancel the function, select [OFF].Auto slow shuttermode (RAM)(-RW‹VR›)(-RW‹V›)(-R)(-R]DL)(SD)You can record bright pictures even in dark placesby slowing the shutter speed.Select the menu. (l 26)[ADVANCED] # [AUTO SLW SHTR] # [ON]≥ The default setting is [ON].≥ To cancel the function, select [OFF].