113Designating Scenes to be Printed (DPOF)You can use DPOF to set print information, including selection of the scenes to be printed, so that you willbe able to use it on a system conforming to DPOF.Note :DPOF stands for digital print order format. DPOF is used to ask a print lab to print recorded stills.1 Set the power switch to “ PHOTO”.2 Press the DISC NAVIGATION button.3 Select the scene to which DPOF is to be set.4 Press the MENU button.5 Choose “DPOF” on the“Scene” menu screen,and then press the button.6 The “DPOF Set” screenwill appear: If you aresure you want to set DPOF to the scene, press the button.If you want to change the scene to which DPOFis set, you can change it on this screen.7 Use joystick to specify thenumber of prints, andthen press the button:Tilt it up or to right: Toincrease the number oneby one.Tilt it down or to left: To decrease the numberone by one.After setting, the “DPOF Set” screen will berestored.Repeat steps 6 and 7 to set DPOF to another still.8 Press the button to quit.Note :• If you press the MENU button before pressing the button in step 6, the submenu screen will appear. (P.104)• You can also select multiple photos (P.100).• If you specify the number after selecting multiple stills, thesame specified number will be set to all those stills.• Up to 99 prints can be set for one scene. The maximumnumber of settable prints on one card is 999.• This DVD Palmcorder may not recognize DPOF that hasbeen set on another device: Always set the DPOF on thisDVD Palmcorder.S c e n eENTER RETURNSe l e c tDe t a i lL o c kDe l e t eDPOF7 / 19DPOF Se tENTER EXIT6DPOF icon7 / 19DPOF Se tENTER EX I T3
