86Magnifying Subject Image (Dig. Zoom)When the zoom lever is moved down to “T” control side with Dig. Zoom 40× or 240× specified, digitalzoom will automatically kick in when optical 10× zoom range is exceeded. You can set the digital zoomto 40× or 240× for movie recording, or 40× for still recording.1 Press the MENU button,choose “Dig. Zoom” onthe “Camera FunctionsSetup” menu screen, andthen press the button.2 Choose the desired magnification, and thenpress the button.3 Press the MENU button to end the setting.Moving the zoom lever will display the digitalzoom bar. Dig. Zoom “240×”, “40×” or “Off” setting will bestored in memory even if the DVD Palmcorder isturned off.Note :• You can check whether Dig. Zoom is “240×”, “40×” or“Off” by pressing the DISPLAY button and reviewing theon-screen information.• You can also use the DIGITAL ZOOM button on remotecontroller to switch the digital zoom setting: Pressingthe button during movie recording will switch the settingbetween “Off”, “40×” and “240×”: Pressing the buttonduring still recording will switch between “Off” and“40×”.• When using card, zooming only up to 40× is possible,even when “240×” or “40×” has been chosen.• If the power switch is set to “ PHOTO” with DVD-RAMdisc loaded, zooming only up to 40x is possible, evenwhen “240×” has been chosen.Ca m e r a F u n c t i on s S e t u pP r o g r a m AEWh i t e Ba l .D i g . Z o omE I S4 0 x2 4 0 xENTER RETURN RAMO f fW i n d C u t3 0 MIN0 : 0 0 : 0 0REMFINE8 : 0 0 AMS E P 3 0 2 0 0 3TWWWTTWhen Dig. Zoom is "Off"When Dig. Zoom is "On"(40x)Digital zoom rangeWhen Dig. Zoom is "On"(240x)Digital zoom range(only in movie recording)
