69Playing BackImmediately Checking Recorded SceneYou can check your recording immediately on the spot.1 Press button in the recording pause status.The DVD Palmcorder will enter the playbackmode, and the scene you have recorded last willbe played back.When playback is finished, the DVD Palmcorderwill enter the pause status at the last image ondisc.If the playback pause status continues for as longas 5 minutes, the DVD Palmcorder willautomatically return to the recording pausestatus.2 Press the button.Playback will stop, and recording pause statuswill be restored.Note :• If the LCD monitor is open during playback of movie,playback sound will be heard from the speaker. Adjust thesound volume using the volume control buttons ( , ).• To temporarily stop playback, press the button.Press the button again to restart playback.• Even if you stop playback midway and immediately startrecording again, the new image will be recorded after thelast scene on disc or card (the previous images will not beoverwritten).• This DVD Palmcorder can play back image data recordedon other digital cameras conforming to the DCF (Designrule for Camera File system) standard. The range ofimage data normally playable on this DVD Palmcorder isthat with pixels from 80 horizontal x 60 vertical to 4000horizontal x 3000 vertical. If the pixel data exceeds thisrange, blue thumbnails will appear (see Fig. 1) indicatingthe image is unplayable. Playback may also beimpossible even if the pixel data is within this range.• When playing back a still with a large number of pixels oncard, “Playback.” will appear, and it will take some time forthe still to appear.• Depending on the amount of data to be played back, itmay take some time for the playback image to appear.• Do not operate the power switch or remove the card whilethe ACCESS/PC or CARD ACCESS indicator is lit orblinking: Doing so may damage the card or the data oncard.Tilt up/down and to left/right to select, and thenpress to designate.1/ 6A l l s c e n e sPLAYFig. 1*
