1081Dividing Movies (Edit - Divide)You can divide a scene into two parts.To delete unnecessary portion of scene, first divide the scene, and then delete the unnecessary portion.1 Press the DISC NAVIGATION button.2 Select the scene to be divided.3 Press the MENU button.4 Choose “Scene”, “Edit”,“Divide” and then pressthe A button.5 The “Divide Scene”screen will appear. If youare sure you want todivide the selected scene, press the A button:The selected scene will be played back.If you want to change the scene to be divided,you can change it on this screen.The selected scene will be played back.6 When you reach the pointwhere you want to dividethe scene, press theSELECT button.7 The screen for verifyingdivision will appear:choose “YES”, and thenpress the A button.Choose “NO” to canceldivision.After division, the “Divide Scene” screen will berestored.Repeat steps 5-7 to divide another scene.8 Press the g button to quit.Note :• The status bar of scene being played back can beswitched off or on by pressing the DISPLAY button.• Search and frame advance are useful when designatingdivision points.• If a special effect has been added to the original scene,the “IN” effect will be added to the first half of scene, andthe “OUT” effect to the latter half.• The division point may drift before or after the designatedpoint by approximately 0.5 seconds.• Since a scene with skip set cannot be played back, nodivision point can be specified. Release the skip for thescene before dividing it.• If the division point is at a still, a message will appear, butno division will be made.• If the division point is at the start or end of a scene, amessage will appear, but no division will be made.• A movie scene whose recording time is 0.5 seconds orless cannot be divided.• If free space available on disc is insufficient, division willnot be possible. Delete unnecessary scenes.• Pressing the g button on the verification screen willrestore the thumbnail display screen.• If you press the MENU button before pressing A instep 5, the submenu will appear (see page 103).SceneRAMENTER RETURNEditEffectCopySelectDetailETCDivideDeleteCombineSelect Division PointRAM002 0:00:18ENTER CANCELSELStatus bar of scenebeing played backENTERDivide Scene?Divide SceneYES NO