83Using the Electronic Image Stabilizer (EIS)When you use zoom to record a magnified subject image, it will correct fuzziness in the recorded image.1 Press the MENU button,choose “EIS” on the“Camera FunctionsSetup” menu screen, andthen press the Abutton.2 Choose “On” or “Off”, and then press the Abutton.3 Press the MENU button to end setting.lChecking whether EIS is On or OffYou can check whether EIS is On or Off by the on-screen information display.After recording with EIS set to “Off”, it isrecommended that you return the setting to “On”and then turn the DVD Video Camera off, unlessyou normally record with EIS “Off” setting.Note :• The EIS setting will be stored in memory even when theDVD Video Camera is turned off.• It is recommended that you specify “EIS: Off” when usingthe DVD Video Camera on a desk or tripod.• When “EIS: On” is specified, there will be a slightdifference between the actual movement and themovement on screen.• Gross camera shake may not be entirely corrected evenif “EIS: On” is specified. Firmly hold the DVD VideoCamera with both hands.• When you record pictures with 10x or more magnificationand the EIS is “On” in dim places, after-images may standout. In this case, we recommend using a tripod andturning the EIS to “Off” (only for VDR-M53PP/VDR-M55PP).• The EIS function cannot be used when still images arerecorded (only for VDR-M75PP/VDR-M95PP).• The EIS function will work only during movie recording.(only for VDR-M75PP/VDR-M95PP).Reducing Wind Noise during Recording (Wind Cut)When recording sound from the microphone built into this DVD Video Camera, you can reduce wind noisein recording.If “Wind Cut: ON” is specified, the low-frequency components in the sound picked up by the microphonewill be cut off during recording: This makes it easier to hear the target voice or sound during playback.1 Press the MENU button,choose “Wind Cut” on the“Camera FunctionsSetup” menu screen, andthen press the Abutton.2 Choose the desired option, and then press theA button.3 Press the MENU button toend setting.Note :• You can also use the on-screen display to confirm thatWind Cut has been set.• The Wind Cut setting will be stored in memory even whenthe DVD Video Camera is turned off.• The Wind Cut function will work only during movierecording.• The Wind Cut function works only with the built-inmicrophone. It will not function when using an externalmicrophone (P. 70).Camera Functions SetupProgram AEWhite Bal.Dig.ZoomEISOffOnENTER RETURN RAMWind Cut3 0 MIN0 : 0 0 : 0 0REMFINE8 : 0 0 AMSEP 3 0 2 0 0 5EISCamera Functions SetupRAMProgram AEWhite Bal.Dig.ZoomWind CutEISENTER RETURNOffOn3 0 MIN0 : 0 0 : 0 0REMFINE8 : 0 0 AMSEP 3 0 2 0 0 5Wind cut icon
