34SetupThis section explains preparations for recording - setting up the DVD Video Camera and battery pack.Setting Up the DVD Video CameraHolding DVD Video CameraUsing Grip BeltInsert your right hand from the bottom ofDVD Video Camera up to the base of yourthumb.Put your hand in a position where you caneasily operate the REC button, Photoshot button, and the Zoom lever.Adjust the length of grip belt so that theDVD Video Camera is stable when youpress the REC button with your thumb.1)Detach the belt.2)Ajust the length of grip belt.3)Attach the belt.Note :Do not adjust the grip belt while holding the DVD Video Camera: Doing this could cause the DVD Video Camera to falland be damaged.To use as a Hand Strap (Only for VDR-M95PP)Using the Grip Belt as a hand strap makes it easier to carry the DVD Video Camera.1 Detach the Grip Belt from the Video Camera.1) Open the Lock cover.2) Push the Lock button and pull the grip beltfrom the DVD Video Camera.Support the DVD Video Camera securely bythe hand to avoid falling.2 Make it a hand strap.1) Turn over the belt.2) Pull the tip in the derection of thearrow.3) Attach the belt.• VDR-M95PP• VDR-M53PP/VDR-M55PP/VDR-M75PPLock coverLock coverLock buttonOpen the lock cover while pinching the protectionportion of both ends.Return the lock cover to the closed positionafter pulling out the grip belt.
