Panasonic VIERA TH-40D400A Operating Instructions Manual

Also see for VIERA TH-40D400A: Operating instructions

Setting Up the TV523Preventing the TV from falling overIt is recommended to secure the pedestal to a furnitureas shown to prevent the TV from falling over.●This information is designed to reduce the risk ofinjuries caused by the TV falling over. However, nomeasure can guarantee protection in all cases.Wood screwScrewOptional position for installationBandRemoving the pedestal from the TVBe sure to remove the pedestal in the following waywhen using the wall-hanging bracket or repacking theTV.1 Lay the TV on a foam mat or thick soft cloth on atable.2 Remove the assembly screws from the TV.3 Pull out the pedestal from the TV.4 Remove the assembly screws from the bracket.Inserting remote’s batteriesNote the correctpolarity (+ or -)Press the hook andlift the coverWall mounting the TV (optional)Choosing to wall mount the TV shall be done at theowner’s risk and expense. Always use a qualifiedinstaller to perform a TV wall bracket installation.Incorrect installation may cause TV to fall, resulting inpersonal injury and product damage that is not coveredby warranty.bRear of the TVScrew for fixing the TV onto thewall-hanging bracket (not supplied)Depth ofscrew(View from the side)a■ Holes for wall-hanging bracket installationa: 200 mmb: 200 mm■ Screw specificationType: M6Depth of screw:Minimum: 9 mmMaximum: 10 mmWarning●When optional accessories such as wall brackets etc.are used, always read and follow the manufacturerinstallation and usage instructions.●Do not mount the unit directly below ceiling lights (suchas spotlights or halogen lights) which typically giveoff high heat. Doing so may warp or damage plasticcabinet parts.●When installing wall brackets you must ensure the wallbracket is not electrically grounded to metal wall studs.Always ensure that there are no electrical cables,pipes etc. in the wall before you begin the wall bracketinstallation.●To prevent fall and injury, remove the TV from its fixedwall position when it is no longer in use.