Panasonic VIERA TH-40D400A Operating Instructions Manual

Also see for VIERA TH-40D400A: Operating instructions

Connecting the TV6Connecting the TV●Please ensure the TV is disconnected from the mainssocket / power point before attaching or disconnectingany RF / AV leads.●External equipment and cables are for illustrativepurposes only and not supplied with this TV.●Check the type of terminals and cable plugs arecorrect when connecting.●When using an HDMI cable, use the fully wired one.●Keep the TV away from electronic equipment (videoequipment, etc.) or equipment with an infrared sensor.Otherwise, distortion of image / sound may occur oroperation of other equipment may be interfered.●Also read the manual of the equipment beingconnected.TerminalsRear of the TV214351 HDMI 1 - 22 AV IN3 Aerial terminal4 DIGITAL AUDIO OUT5 USB portConnectionsAerial and mains leadRF cableMains lead(supplied)AerialInsert the mains plug firmly into place.●When disconnecting the mains lead, be absolutelysure to disconnect the mains plug at the socket outletfirst.●To minimise DTV impulse noise pickup, please ensurethere is separation between mains lead and RF cable.●Do not place the RF cable under the TV.●An aerial, corraect cable (75  coaxial) and correctterminating plug are required to obtain optimum qualitypicture and sound.●If a communal aerial system is used, you may requirethe correct connection cable and plug between the wallaerial socket and the TV.●Your local Television Service Centre or dealer may beable to assist you in obtaining the correct aerial systemfor your particular area and the accessories required.●Any matters regarding aerial installation, upgradingof existing systems or accessories required, andthe costs incurred, are the responsibility of you, thecustomer.●If the aerial is placed in the wrong location, interferencemight happen.