Panasonic VL-MN1000 Installation And Operating Instructions Manual

4.1 Difference between talkingand monitoring"Talking" means that 2 parties can talk to and hear eachother. If one party (for example, a visitor) calls and theother party (for example, a resident) answers, the 2parties can talk. While talking, you (the room monitoruser) will be able to see the camera image of the personyou are talking to, if available. When you are using aroom monitor to talk, the other party cannot see you."Monitoring" means that a resident is using a roommonitor to view live camera images from a lobby station,door station, or standalone camera installed in thefacility. While monitoring, you can see what is happeningat the camera, but no sound is heard.4.2 Answering callsWhen you receive a call, the room monitor rings. If theother party is using a device with a camera (such as alobby station), the camera image is also displayed.AAvailable featuresAnswering a call1. Tap “Answer” or press M N.R Speak within about 50 cm of the microphone.R Speak alternatively with the other party. If you andthe other party speak at the same time, you willnot hear each other.R Calls are disconnected after the pre-programmed"timeout" time elapses.2. When finished, tap “Hang Up” or press M N.R If the display turns off while talking, you can turnit on again by tapping the display.Features available while talking on a call– “Hang Up”: Ends the call.– “Unlock”: Opens the corresponding door.– “Forward”: See 4.4 Transferring calls (Page 14).– : Records camera images and saves them inyour room monitor as a video file. (Sound from theroom monitor’s microphone is not recorded.)– : Stop recording.– : Captures a still image (i.e., picture) from thecamera and saves it in your room monitor.– : Indicates the room monitor’s speaker is on. Tapto turn the speaker off (i.e., mute the other party’svoice).– : Indicates the room monitor’s speaker is off. Tapto turn the speaker on (i.e., turn off the mute).– : Indicates the room monitor’s microphone is on.Tap to turn the microphone off (i.e., mute your voice).– : Indicates the room monitor’s microphone is off.Tap to turn the microphone on (i.e., turn off the mute).– : Decreases the room monitor’s speaker volume.– : Increases the room monitor’s speaker volume.124. . Talking and monitoring features4. Talking and monitoring features