Panasonic Versio EB-TX320 Operating Instructions Manual

Also see for Versio EB-TX320: Operating instructions

Chapter 212 Getting StartedStandby DisplayThe standby display appears when your phone is on and in an “idle” state.You can return to the standby display at any time (except during a call) bypressing or by pressing and holding . The backlight turns onautomatically for 15 seconds when you power up the phone or when youpress any key.Note: The backlight remains on when the phone is plugged intoa DC Adapter.Moving through the MenuYou access the Main Menu from the standby display:MENU is displayed on the bottom left side of the display. To access theMain Menu, press the corresponding softkey ( ) on the keypad justbelow where MENU is displayed. After entering the Main Menu, presseither softkey ( or ) to select the options displayed above them.Within the menu, the selected feature or function is indicated by an arrow( ). Use the navigation key scroll areas as described in the table on page11.When an option is selected using the softkeys, the display changes to offeranother level of softkey options. This process continues until you haveresponded to all display prompts and options for a particular softkey.Shortcut KeysYou can quickly access many of the phone’s features by pressing shortcutkeys instead of scrolling through the numbered options on the display. Fora complete list of the shortcut keys, refer to the Menu Map on the inside ofthe front cover. For example, you can select Key Volume by pressing(MENU), then press (Tone Settings) and (Key Volume).