Panasonic Versio EB-TX320 Operating Instructions Manual

Also see for Versio EB-TX320: Operating instructions

Chapter 3Everyday Operations 19Speed DialTo call a Speed Dial number directly from standby (without going to amenu), enter the memory location number that contains the phone numberyou want to call, and press .Note: If Emergency Call is set to On (see “Emergency Call” onpage 47) and you press and , the emergency number911 will be called.To view a Speed Dial number before placing the call, follow these steps:1 From standby, enter the memory location number that contains thephone number you want to call, then press . (For example, to diala number stored in location 25, press .)• If the entered memory location is empty, thedisplay shows the entered digits and the # sign.Press briefly to return to standby.2 Scroll to the Speed Dial number (or to another number in that location)and press to place the call.Answering CallsThe phone must be on to receive calls. It will not ring or vibrate whenpowered off.When a call is received, the phone rings and/or vibrates.• If you have Caller ID, the caller’s phone number isdisplayed under Incoming Call.• If the caller’s phone number matches an entry inthe Phonebook, the corresponding name appearsand the backlight changes color (unless the callwas placed through a PBX).1 To answer, press or any key except . (See “Answer KeyOptions” on page 22.)• Quickly pressing will stop the ringing and/or vibration alert, but notanswer the call.2 When you are ready to end the call, press to disconnect.