Using TV Guide●Basic19View details of the programme (DVB mode)Select the programme View details Wed 28.10.200910:46Timer Programming RETURNEXITWed 28.10.2009DIY SOSBBC ONE20:00 - 20:30, 30 min.TV Guide: LandscapeReturn to listDetailsPress again to return●to TV Guide.selectTimer Programming (DVB mode)Timer Programming is a timer to remind watching or record the programme to the external recorder.Select theforthcomingprogrammeselectsetSelect the function(Reminder or Ext Rec.)LEDLED will turn to orange if●Timer Programming is set.(Orange LED will flash if TimerProgramming is in progress.)Timer Programming Wed 28.10.2009 10:461D BBC ONEWed 28.10.2009 20:00 20:30Date Start End--- --/-- --:-- --:----/-- --:-- --:----- --/-- --:-- --:----- --/-- --:-- --:----/-- --:-- --:--(30 min.)(--- min.)(--- min.)(--- min.)(--- min.)---Ext Rec.------------Channel NameFunction No.(Timer Programming screen)Ext Rec. : to record the programme to the recorderWhen the start time comes, the channel will be switched automaticallyand the video and audio signals will be output. 2 mins. before thestarting time, a reminder message appears if you are watching TV.Reminder : to remind watching the programmeWhen you are watching TV, a reminder message appears 2 mins. beforethe start time. Press the OK button to switch to the programmed channel.No signals will be output from any terminals.selectstoreTo check / change / cancel a Timer Programming event■ “Timer Programming” (p. 39)To return to TV Guide■ RETURNIf you select the current programme■A confirmation screen whether you wish to watch or record it will appear.Select “Timer Programming” and set “Ext Rec.” to record from the time you finish the timer programmingevent setting.ViewDas Erste19:30- 20:00Timer ProgrammingselectsetNoteThis function is not available in Analogue mode.●Timer Programming does not work properly if the TV does not acquire the correct time data from the TV signal.●No other channel can be selected while Ext Rec. of Timer Programming is in progress.●When recording programmes, be sure to make the proper settings on the recorder connected to the TV.●If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 52 and p. 53) andthe “Link Settings” (p. 28) are completed, no setting of the recorder is required. Also read the manual of the recorder.View advertisementDepending on the country you select, this TV supports the GUIDE Plus+ system in DVB-T orAnalogue modeThe postcode entry or update is required. Follow the message’s instructions.Also possible to setup manually from the Setup Menu● “Update” / “Postcode” in “GUIDE Plus+ Settings” (p. 31)Enter your postcode when using this function for the first time. If you enter an incorrect postcode for your●area, or no postcodes are entered, advertisement may not be displayed correctly.Display advertisement informationOPTION To display the latest advertisement● “Update” in “GUIDE Plus+ Settings” (p. 31)To change advertisements■To return to TV Guide■ OPTIONor RETURNNoteTo update the information continuously, the TV must be left in Standby mode at night.●Other useful functions■
