Retuning from Setup Menu● AdvancedTEXT STTL INDEX HOLDDIRECT TV RECASPECT NAVOPTION RETURNEXITINPUTTVMENU331 Select DVB-T orAnaloguep. 14TV2 Display the menu MENU3 Select “Setup”Main MenuPictureSoundSetupaccessselect4 Select “DVB-T Tuning Menu” or“Analogue Tuning Menu”Setup Menu 1/2Off Timer OffAccessAccessLink SettingsChild LockAnalogue Tuning MenuDVB-T Tuning MenuLanguageDisplay SettingsCommon InterfaceSystem MenuTimer Programmingaccessselect“DVB-T Tuning Menu” is●available in DVB-T mode only.“Analogue Tuning Menu” is●available in Analogue modeonly.5 Select “Auto Setup”DVB-T: accessselectDVB-T Tuning MenuFavourites EditChannel ListAuto SetupManual TuningUpdate Channel ListAccessNew Channel Message OnSignal ConditionAnalogue:Analogue Tuning MenuChannel ListAuto SetupManual TuningAccess6 Start Auto SetupAll DVB-T tuning data will be erasedDVB-T Auto SetupDVB-T:DVB-T Auto SetupCH Channel Name Type QualitySearchingThis will take about 3 minutes.Free TV: 4Progress CH 5 6962 CBBC Channel Free TV 1062 BBC Radio Wales Free TV 1062 E4 Free TV 1062 Cartoon Nwk Free TV 10Pay TV: 0 Radio: 0All analogue tuning data will be erasedAnalogue Auto SetupAnalogue:Analogue Auto SetupCH Channel NameSearchingThis will take about 3 minutes.Analogue: 2CH 2 CC 1 4178CH 29ScanCH 33 BBC1Settings are made automaticallyThe channel, language, country / region settings are downloaded to●a Q-Link or VIERA Link compatible equipment connected to the TV.When the operation is completed, the channel at channelposition “1” will be displayed.DVB-T or Analogue channelsAutomatically retune all DVB-T or Analogue channels received in the area.DVB-T Auto Setup is available if DVB-T channel tuning is already performed.●Only DVB-T channels are retuned in DVB-T mode.●Only Analogue channels are retuned in Analogue mode.●All the previous tuning settings are erased.●If a Child Lock PIN number (p. 40) has been set, it must be entered.●To return to TV■ EXITNoteIf tuning has not been done●completely“Manual Tuning”(p. 35 and p. 37)For Auto Setup, using■the buttons on the sidepanel of the TV (p. 9)Press repeatedly until“Auto Setup” appearsAccess “Auto Setup”Start “Auto Setup”To return to TV●