Panasonic Viera TH-42LRG20E Operating Instructions Manual

Also see for Viera TH-42LRG20E: Operating instructions Service manual Operating instructions

52Q-LinkPreparations■ Connect the DVD Recorder / VCR with the following logos:●“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK”Q-Link connection● p. 50Use fully wired SCART cable.●Set up the DVD Recorder / VCR. Read the manual of the recorder.●Download preset - channel, language, country / region settings● “Preset download” (see below)Features available■Preset downloadChannel, language, country / region settings can be downloaded to the recorder.DVB-C channel setting cannot be downloaded.●To download settings● “Download” (p. 28) or “Auto Setup” (p. 33) or “Auto Setup” - when first using the TV(p. 12 and p. 13)Direct TV Recording - What you see is What you recordRecording the current programme in DVD Recorder / VCR immediately.EXITDIRECT TV REC DIRECT TV RECAvailable conditions:● Current mode Using tuner How to recordAnalogue TV TV monitor outRecorder Recorder’s tunerDVB TV TV monitor outAV( watching recorder’s tuner) Recorder Recorder’s tunerAV( watching recorder’s external input) – Recorder’sexternal inputAV( watching TV’s external input) – TV monitor outWhen Direct TV Recording is performed, the recorder is automatically●turned on if it is in Standby mode.Changing channel or turning off the TV is available while the recorder is●recording from its own tuner.Changing channel is not available while the recorder is recording from●the TV tuner.To stop recording■ Unlock the tunerUnlockContinueTuner LockedPlease stop recording to operateEXITPower on link and Easy playbackSet Power on Link “On” in the Setup Menu to use this function “Power on Link” (p. 28)When DVD Recorder / VCR starts playback or direct navigator / function menu for the equipmentare activated, the TV is turned on and input mode is switched automatically so that you can view thecontent. (Only when the TV is in Standby mode.)Power off linkSet Power off Link “On” in the Setup Menu to use this function “Power off Link” (p. 28)When TV is set to Standby mode, the recorder is also automatically set to Standby. (Only when thevideocassette or disc is not active.)This function will work even if the TV enters Standby mode automatically by auto power standby function.●“DATA LOGIC” (a trademark of Metz Corporation)•“Easy Link” (a trademark of Philips Corporation)•“Megalogic” (a trademark of Grundig Corporation)•“SMARTLINK” (a trademark of Sony Corporation)•NoteSome recorders are not applicable. Read the manual of the recorder.●Link Functions (Q-LinkVIERA Link)