Panasonic Viera TH-42PHW5 Operating Instructions Manual

33SET UP for Input SignalsCOLOR SYSTEM / Panasonic AUTOSelect SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.(“SIGNAL [VIDEO]” menu is displayed.)Press to select the “COLOR SYSTEM” or“Panasonic AUTO”.Press to select each function.3D Y/C FILTER (NTSC)COLOR SYSTEMPanasonic AUTO (4:3)ONAUTONORMAL3:2 PULLDOWN OFFSIGNAL [ VIDEO ]Press (ACTION) buttonSET UPSIGNALSCREENSAVERCOMPONENT/RGB-IN SELECTRGBOSD LANGUAGE ENGLISH (US)If the image becomes unstable:With the system set on Auto, under conditions oflow level or noisy input signals the image may inrare cases become unstable. Should this occur,set the system to match the format of the inputsignal.ModeColor systemPanasonicAUTO (4:3)FunctionSet the color system to match the input signal. If set to “AUTO”, the color system isdetermined automatically.Set to “NORMAL” to view 4:3 images in an unchanged format when Panasonic AUTOis selected. If you would like to view 4:3 images in “Just” format, set to “JUST”.AUTO PAL SECAM M NTSC NTSC3:2 PULLDOWNSelect “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) orCOMPONENT input signal mode. (“SIGNAL [VIDEO]” menu is displayed.)Press to select 3:2 PULLDOWN.Press to set ON/OFF.Press to exit from adjust mode.Note:When ON, this setting only affects the following signal input.• NTSC signal input during “VIDEO (S VIDEO)” input signal mode.• 525i(480i) signal input during “COMPONENT” input signal mode.When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which arerecorded at 24 frames per second.If the picture is not stable, turn the setting to off.RPress (ACTION) buttonSET UPSIGNALSCREENSAVERCOMPONENT/RGB-IN SELECTRGBOSD LANGUAGE ENGLISH (US)3D Y/C FILTER (NTSC)COLOR SYSTEMPanasonic AUTO (4:3)ONAUTONORMAL3:2 PULLDOWN OFFSIGNAL [ VIDEO ]SIGNAL [ COMPONENT ]3:2 PULLDOWN OFF