Panasonic Viera TH-42PHW5 Operating Instructions Manual

9Remote Control BatteriesRequires two AA batteries.1. Turn the transmitter face down.Press and slide off the batterycover.2. Install the batteries as shown inthe battery compartment.(Polarity + or – must match themarkings in the compartment.)Two "AA" sizeHelpful Hint:For frequent remote control users, replace old batteries withAlkaline batteries for longer life.Precaution on battery useIncorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.Observe the following precautions:1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.2. Do not combine a used battery with a new one.3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.5. Battery replacement is necessary when the remote control acts sporadically or stops operating the Plasma Display.3. Replace the cover and slide inreverse until the lock snaps.